J1708 Serial Data Link | leading to various signal inputs

Serial Data Link

J1708 SDL #700	The SDL J1708 is a bridge between a serial data communication network SAE J1708 and an instrument, for example, Tachograph. The device provides: - Pulse outputs for Road Speed, Fuel Rate, Engine Speed; - Plus (+) and Minus (-) outputs for 1318 Type of Tachograph; - Self-test with output of preset calibrated data without required vehicle or engine running; - 6 LED indicators; - Dip Switches or Jumpers to set up the output signals. $135.00USD

SDL 1939 #703	The SDL J1939 is a bridge between a serial data communication network SAE J1939 and an instrument, for example, Tachograph. The device provides: - Pulse outputs for Road Speed, Fuel Rate, Engine Speed; - Plus (+) and Minus (-) outputs for 1318 Type of Tachograph; - Self-test with output of preset calibrated data without required vehicle or engine running; - 6 LED indicators; - Dip Switches or Jumpers to set up the output signals. $135.00USD

SDL Universal #706	The SDL Universal is a bridge between a serial data communication network SAE J1939,SAE 1708 and an instrument, for example, Tachograph. The device provides: - Pulse outputs for Road Speed, Fuel Rate, Engine Speed; - Plus (+) and Minus (-) outputs for 1318 Type of Tachograph; - Self-test with output of preset calibrated data without required vehicle or engine running; - 6 LED indicators; - Dip Switches or Jumpers to set up the output signals. $139.00USD

The Aftermarket Harness #578	- This harness connects to various points on the vehicler The Aftermarket Harness (see above) is also available separately, with fuses and 1M wires . $15.00USD

Note: All The Above SDLs Provide Rpm and Fuel Pulses,Bi-Phase Speed O/P.,Following Standard J1708 Protocol. Alternative OutPuts or Different MID or PID's Avaliable On Special Order. All The Above Devices Use Switch-Selectable 12/24V Nominal Via Linear Regulator. Download Spec Sheet for more info.